10KVA~100KVA Servo Type Three Phase Voltage Stabilizer is a standard product of ABOT Power Supply. We have been in the field since 2008, due to reliable product performance and high technology we have gained many brand customers, like Philips, Hitachi, Schneider Electric, Foxconn, Flextronics, etc. The products are widely used in industry, IT, railway, freeway, medical equipment, lighting filed. Now we are looking for wholesaler and agents all over the world, welcome send us inquiry. Below are the details of 10KVA~100KVA Servo Type Three Phase Voltage Stabilizer.
1. Product Introduction
10KVA~100KVA Servo Type Three Phase Voltage Stabilizer is suitable for CNC, warehouse, injection molding machine, lighting etc. It is suitable for the power of 10KVA to 100KVA. Servo motor controlled, pure copper coil, carbon brush, auto circuit board are the main component of this type of stabilizer. The carbon brush will be moving on the coil to adjust the input voltage when it fluctuates. Large LCD panel, easy to set up parameters.
2. Product Parameter
Product information |
|
Desc # |
10KVA~100KVA Servo Type Three Phase Voltage Stabilizer |
Technology |
Servo motor control system |
Input Voltage |
380V±20%, or customized |
Output Voltage |
380V±2%, or customized |
Phase |
Three Phase |
Frequency |
50Hz/60Hz |
Response Time |
<1 sec.(against 10% input voltage deviation) |
Accuracy |
±2% |
Efficiency |
>98% |
Power Factor |
0.8 |
Protections |
over voltage, under voltage, over current, short circuit |
Waveform Distortion |
No additional waveform distortion |
Insulation Level |
Level H, 180℃ |
Ambient Temperature |
-20C~45℃ |
Relative Humidity |
0~90%, Non-condensing |
Cooling Method |
Forced ventilation (Fan) |
3. Product Typical Feature
● Servo motor controlled, high over load ability
● Independent regulation on three phase, solve three phase voltage imbalance problem
● Full automatic stabilizer
● With compensation transformer, wide input voltage range
● With fan for air cooling
● Quick response to voltage fluctuations
● High efficiency
● LCD display, easy to operate
● Full Protections
4. Product Feature And Application
10KVA~100KVA Servo Type Three Phase Voltage Stabilizer is widely used for lab, data center, railway, freeway, medical equipment, bank, etc.
5.Product Details
The Details of 10KVA~100KVA Servo Type Three Phase Voltage Stabilizer as below:
6. Product Qualification
The Qualification of 10KVA~100KVA Servo Type Three Phase Voltage Stabilizer as below:
7.Deliver,Shipping And Serving
10KVA~100KVA Servo Type Three Phase Voltage Stabilizer will be covered by stretch film, then packed with a standard exporting wooden box. Can be shipped by Express, Air and Sea transportation.