With Indoor Enclosure Single Phase Isolation Transformer is widely used for CNC, Pump, Injection Molding Machine, Automation Equipment, Lighting, etc. It is developed and produced by ABOT Power Supply independently. Use brand new copper or aluminum coil and silicone steel sheet to have high reliability. We work with Schneider Electric, Hitachi, Philips, Siemens, Foxconn for a long time, due to high quality product and nice service. Agents and wholesalers are welcome to represent our product. Please check the information of with Indoor Enclosure Single Phase Isolation Transformer below. Contact us if you have inquiry.
1. Product Introduction
With Indoor Enclosure Single Phase Isolation Transformer is made up with pure copper or aluminum windings, it is designed to step up/ down the voltage as per requirements and widely used in various power supply sites with frequency 50Hz or 60Hz and voltage less than 1000V AC. When the loading equipment has different voltage from the main grid, then the transformer will be needed, so it is widely used for CNC, Pump, Injection Molding Machine, Automation Equipment, Lighting, etc.
2. Product Parameter
|
Product information |
|
|
Desc # |
With Indoor Enclosure Single Phase Isolation Transformer |
|
Type |
Dry type |
|
Input Voltage (Primary) |
110V/ 120V/ 208V/ 220V/ 230V/ 240V/ 380V/ 415V/ 480V (or customized) |
|
Output Voltage (Secondary) |
110V/ 120V/ 208V/ 220V/ 230V/ 240V/ 380V/ 415V/ 480V (or customized) |
|
Phase |
Single Phase |
|
Frequency |
50Hz/60Hz |
|
Insulation Resistance |
≥5 MΩ |
|
Electrical Strength |
3000V AC/1 min |
|
Efficiency |
>95% |
|
Power Factor |
0.8 |
|
Noise |
35-65dB (1 meter) |
|
Enclosure |
Indoor use metal enclosure |
|
Ambient Temperature |
-20C~45℃ |
|
Relative Humidity |
0~90%, Non-condensing |
|
Cooling Method |
Dry type air cooling |
3. Product Typical Feature
● Good over load ability
● With fan for air cooling
● High efficiency
● Gauge to display voltage
● Long lifespan
● Easy to install and operate
● Wide applications
4. Product Feature And Application
With Indoor Enclosure Single Phase Isolation Transformer is widely used for CNC machine, Lighting, Medical Equipment, Automation Equipment.
5.Product Details
The Details of With Indoor Enclosure Single Phase Isolation Transformer as below:
6. Product Qualification
The Qualification of With Indoor Enclosure Single Phase Isolation Transformer as below:
7.Deliver,Shipping And Serving
With Indoor Enclosure Single Phase Isolation Transformer will be covered by stretch film, then packed with a standard exporting wooden box. Can be shipped by Express, Air and Sea transportation.
