Three Phase Online UPS is produced by ABOT Power Supply, to protect data centers, mission-critical IT and light industrial applications where shutdown could jeopardize business operations; they provide a reliable power supply, preventing power outages and disturbances that can lead to loss of service, reduced productivity, equipment damage or safety problems. Our three-phase UPS are best in class in terms of efficiency, reliability, flexibility and serviceability; they are the ideal solution for an uninterrupted supply, providing business continuity without compromise. Below are the information of Three Phase Online UPS.
1. Product Introduction
Three Phase Online UPS is double conversion online type, adopt with advanced IGBT power component, high performance SPWM inverter, intelligent multi-mode battery management. Input EMI filter, digital control, output with isolation transformer, to resist of damage from high power load when power on/off. Pure sine wave due to output with inductance, capacitance, L/C filter. Applying innovated current sharing rectifier control, master-slave synchronization in sequence control, multi-level decentralized control and 3-level sine wave modulation technology, it features great efficiency, flexibility and reliability.
2. Product Parameter
|
Rectifier Input |
|
|
Voltage |
3*380V±25% |
|
Frequency |
50Hz±5% |
|
Rectifier input part |
With input reactor |
|
Grounding mode |
TN-S |
|
Ground resistance |
≤1Ω |
|
Rated DC voltage |
384V |
|
Inverter Part |
|
|
Output voltage |
three-phase five-wire system AC 380±1% |
|
Frequency |
Same with local electricity frequency when normal; 50±0.05Hz under battery supply mode |
|
Voltage stability rate under 100% three phase imbalance load |
≤2% |
|
Waveform distortion |
THD≤2.5% under linear load |
|
Static bypass transfer time |
0 |
|
System efficiency |
>92% |
|
30 minutes overload ability |
110% |
|
15 minutes overload ability |
120% |
|
1 minute overload ability |
150% |
|
Inverter output part |
With isolation transformer for output |
|
Total Data |
|
|
Maintenance bypass |
Provide maintenance bypass with no switching time |
|
LCD Display |
Three phase input and output voltage, frequency, load ratio, battery voltage, battery charge/discharge current, inside temp, calendar |
|
Alarm function |
Yes |
|
Connection type |
RS232, comply with SNMP, remote control |
|
Protect function |
Short circuit, over load, over-temp, battery low voltage, over voltage, low voltage |
|
Electromagnetic compatibility |
Comply with GB9254, A level |
|
Noise |
<65db |
|
Cooling method |
Fan |
|
Operation temperature |
0~+40℃ |
|
Ambient humidity |
0~93% |
|
IP rating |
IP20 |
|
MTBF |
300 thousand hours |
3. Product Typical Feature
● 10KVA-1000KVA capacity, for industrial use.
● Online design, pure sine wave of output, free from wave distortion.
● Input with rectifier module, output with inverter module, SCR module, humanized maintenance.
● Redundant design for key circuit, to improve the system reliability.
● Cold start, automatic restart function.
● Reliable electromagnetic compatibility.
● Friendly human-computer interface with LCD touch screen.
● Smart local and remote monitoring function, RS232 port, compatible with SNMP.
● Self detection and protection functions, high resistance ability of load impact, over current and over circuit protection functions.
4. Product Feature And Application
Three Phase Online UPS is widely used for lighting, bank, medical equipment, data center, etc.
5.Product Details
The Details of Three Phase Online UPS as below:
6. Product Qualification
The Qualification of Three Phase Online UPS as below:
7.Deliver,Shipping And Serving
Three Phase Online UPS will be covered by stretch film, then packed with a standard exporting wooden box. Can be shipped by Express, Air and Sea transportation.
